$4.00Hair Ornaments
click on image for larger view
HO1000
$4.00
Celtic Carnyx Hair Pin is 3-1/4
inches long. This pin is patterned after the
"Carnyx" horns
used by the Celts in the many battles
fought throughout their long and colorful history.
HO1005
$4.00
Victorian Kilt Pin 2-3/4
inches long. This pin is patterned after the kilt pins
first used
after the ban on the wearing of
kilts was repealed.
HO1006 
$10.00
Lindesfarne Dogs Barrette, copied from the Lindesfarne Illustrated gospels, this barrette is suitable for use as either a "pony tail holder" or a side barrette -- 2-3/4 X5/8".
HO1007 $11.25/pr
Small version of HO1006 1-1/2 X 3/8".
HO1008 
$6.75
Hair Stick -- approximately 6" long and capped with a pewter slide with knowtwork.
HO1009 
$10.00/$16.00
Lindesfarne Dogs Side Combs.
HO1010
$6.00
Domed Hair Brooch shown with a Victorian Kilt Pin. This brooch is patterned from an original silver brooch made by Mr. Walt Miller. The kilt pin is shown but not recommended due to the lack of strength the pin has. If it is bent a few times the pin will break. We recommend a steel pin be found to work with the brooch. This brooch is 2-1/4 inches in diameter. If this brooch is sewn onto a bag or other such item the pewter pin works well.
HO1011 
$13.50
Lindesfarne Pony Tail Holder, this piece, depicting interlaced dogs and eagles, is large and not suitable for use as a side barrette. It attaches to the hair with a "French Barrette" and is 2-7/8" wide by 1-3/4" tall.
HO1012 
$13.50
Lindesfarne Pony Tail Holder, this piece, depicting interlaced eagles, is the same size as HO1011 above and attaches in the same manner..
HO1015
$6.00
Bayong Hair Pin approximately 6-1/2 inches long. These pins are imported from the Philippines and are square at the large end. They vary from 6 to 7 inches in length and can be cut to whatever length you may need. We are working on some pewter caps to add a little flash. Please check back.
HO1020
$8.50
Irish Wolfhound Barrette. The Wolfhound is cast facing both left or right and then attached to a stainless steel barrette. The wolfhound is 3/4 by 1-7/8 inches. To order a left facing critter just replace the "R" with an "L" in the item number.